【Tokyo Auto Salon 2020】「Low-down GR Supra Goes Worldwide」The Cambered Supra from 326POWER!
Published : 2020/02/17 11:33 Modified : 2020/02/17 11:33
With extended lower arms for a demon-cambered specification!
Perfect fitment for low-down style
The simple almost-factory bodylines, cambered wheels and insanely low ride height set this Supra apart from the others. This is the trademark look of 326POWER representing Hiroshima prefecture.
“Delivery of the car was delayed. It finally arrived to our shop at the end of November 2019, so we had to rethink our plan. We didn’t have time to produce aero for the car, so our goal shifted to keep bodylines simple and just slam the car as low as we could get it.” says Mr. Haruguchi of 326POWER. In order to achieve the negative camber angle that exceeds the adjustment range from factory, the lower arms were extended by about 20mm on the front and rear both. Height has been lowered by incorporating 326POWER’s “Chakuriki Damper”.
The aero remains factory but camber is adjusted about 10 degrees to reduce ride height to the maximum. This shows glamourous factory body lines of the GR Supra to their full potential.
Wheels are 326POWER original Yaba King KF Racing. The mesh type are displayed on the left side and spoke type are displayed on the right. Sizing is 19-inch, 11.5J at the front and rear, with Hi Fly 235/35 stretched tires. The rim is intentionally set just outside the fender line for an aggressive look.
Mr. Haruguchi commented on the customization of this Supra: “Aero parts are the first thing that TRA Kyoto puts out, so that becomes like a standard look. I haven’t decided if we will produce a full kit or not”, he says. However, we would definitely like to see a 326POWER take on the aerodynamic parts for this model that can match the slammed ride height of this one. We look forward to future developments.
●Special Thanks：326POWER TEL：082-426-3260